KNIPEX StepCut 95 12 160 is a compact cable cutter designed to deliver clean and precise cuts in copper and aluminium cables. It is only 160 mm long, making it easy to handle even in confined workspaces.

The cutter is equipped with a multi-component handle that provides a secure and comfortable grip during use. The special StepCut geometry means that the conductors are cut step by step, reducing the required force by up to 40% compared to standard cable cutters of the same size.

The tool can cut soft, multi-stranded copper and aluminium cables up to 15 mm in diameter (50 mm²) as well as solid cables up to 5 × 4 mm². The cutting blades are inductively hardened to approx. 56 HRC, ensuring long life and precision over time.

KNIPEX StepCut is not suitable for steel wires or hard-drawn copper conductors, but ideal for general installation and electrical work where clean cuts and ergonomics are important.

The Knipex 95 31 280 cable cutter is designed for cutting copper and aluminium cables, both single and multi-stranded. It is not suitable for steel wire, wire rope or conductors with very fine strands. The cutter has hardened, precision-ground blades that ensure clean cuts without crushing the material.

The ratchet principle allows one-handed operation of the tool, making work easier in confined spaces. The two-stage gear drive reduces the required force and provides a smooth and controlled cut. The compact design and low weight contribute to easy handling.

An integrated pinch protection system prevents injuries, and the handle with a steel surface provides stable support during cutting. The cutter can be used for aluminium conductors up to 4 × 150 mm² sector cable and is supplied in an SB blister pack.

Milwaukee replacement blade cable cutter UG M18HCC75 is a set of cable cutter blades developed for use with the underground cutters M18 HCC75 and HCC75R. The blade is designed to deliver precise cuts and maintain high cutting efficiency over time.

As an original Milwaukee accessory, it is engineered to fit precisely into the tool’s mechanism, ensuring correct function and long service life. It is suitable for professional users who need to replace worn or damaged cutting blades on their cable cutter.

The product is supplied as a spare part and may vary in appearance depending on configuration and technical details. Accessories are only included if explicitly stated in the scope of delivery.

The Teng Tools Cable Cutter 497 is designed for efficient cutting and stripping of cables. The cutter is equipped with stainless steel blades that ensure a clean and precise cut, while the integrated stripping knife makes it possible to remove insulation from wires without damaging the conductor.

The handles are made of nylon reinforced with 30% fibreglass, providing a good balance between strength and low weight. The ergonomic handle ensures comfortable use, even during repeated cutting.

With a cutting capacity of up to 22 mm cable diameter and a total length of 138 mm, the cutter is suitable for both professional electricians and hobby users who want a precise and durable tool.

The KNIPEX 95 27 600 is a powerful cable cutter designed for two-handed use, providing the user with optimal control and cutting power when working with large cables. The cutter is deeply insulated and VDE-tested, making it suitable for work under electrical conditions.

The tool is intended for cutting copper and aluminium cables, both single- and multi-stranded, but is not suitable for steel wire or steel rope. The hardened, precision-ground blades ensure clean cuts without crushing the material.

The construction includes a toggle joint mechanism that provides good power transmission and reduces the required force when cutting. The pinch protection reduces the risk of hand injuries, and the adjustable screw joint allows the tool to be adapted as needed.

The blade head is screwed on and replaceable, extending the tool’s service life. With a length of 600 mm and a weight of 2.26 kg, the cutter is robust and suitable for demanding tasks.

The Knipex 95 31 250 is a cable cutter designed for cutting single and multi-stranded copper and aluminium cables. It is not suitable for steel wire, wire rope or very fine, ultra-flexible conductors.

The cutter is equipped with hardened, precision-ground blades that ensure clean and smooth cuts without crushing the material. The ratchet system enables one-handed operation and significantly reduces the required force.

A two-stage gear drive ensures easy and controlled cutting, while the low weight and compact design make the tool suitable for work in confined spaces.

A pinch guard prevents injuries, and the handle with a steel surface provides stability during use. The cutter is supplied in an SB blister pack.

Milwaukee Jaw + Blade Cable Cutter - ACSR is a spare part consisting of a reinforced jaw and a blade made of aluminium steel. It is designed for use with Milwaukee cable cutters and intended for cutting ACSR conductors (Aluminium Conductor Steel Reinforced).

The jaw and blade are supplied as a set, allowing replacement of worn parts and thereby extending the lifespan of the existing tool. The reinforced steel construction contributes to high strength and precision under load.

The product is suitable for professional users working with electrical installations, cable assembly or maintenance of wiring systems, where reliable and durable components are required.

The Teng Tools cable cutter MB444 200mm is designed for efficient cutting of copper and aluminium cables. It is equipped with a clamp lock that contributes to safe handling during use, and two cutting modes that make it possible to adapt the cut to the cable type.

The reversible handles provide extra flexibility, as the cutter can also be used for stripping cables. One-handed operation makes the tool practical in situations where a quick and precise cut is required.

The arms of the cutter are plastic-coated for better grip and increased comfort during extended use. With a length of 200 mm, it is easy to handle and suitable for both professionals and hobby users.

The KNIPEX 95 36 250 is a cable cutter designed to cut copper and aluminium conductors, both single- and multi-stranded. It is not suitable for steel wire or very fine, flexible conductors. The cutter uses a ratchet principle that allows thick cables to be cut with minimal physical effort.

The hardened blades with precision grinding ensure clean cuts without crushing the conductor. The two-stage gear mechanism enables a smooth and controlled cutting motion, making the tool suitable for work in confined spaces.

The handles are insulated with multi-component material and VDE-approved, meaning they meet the requirements for live working. The pinch protection prevents accidental injuries during use.

With a length of 250 mm and a weight of 652 grams, the cutter combines low weight with high strength. It is supplied in SB-back/blister packaging and has a black lacquered surface that protects against corrosion.

The Knipex 95 36 280 cable cutter is designed to cut both single and multi-stranded copper and aluminium cables. It is not suitable for steel wire, wire rope or conductors with very fine strands, but provides precise and clean cuts in the materials it is intended for.

The cutter is equipped with hardened blades with precision grinding that ensure smooth and controlled cuts without crushing the conductor. The ratchet system allows one-handed operation, making work easier, especially in confined work areas.

The two-stage gear transmission provides high power transfer, requiring minimal effort when cutting large cable cross-sections. The low weight and compact design contribute to good handling, while the pinch protection reduces the risk of injury during use.

The tool is VDE-tested, meaning it is tested for work under voltage up to 1000 V, and it comes in a black lacquered finish with SB blister packaging.

Milwaukee replacement blade cable cutter - ACSR is an original replacement blade developed for use with Milwaukee cable cutters. It is made of reinforced aluminium steel, providing a solid and durable construction that withstands the forces that occur when cutting ACSR wires and other hard cable types.

The blade is intended as a spare part, allowing the user to replace a worn or damaged blade without having to replace the entire tool. This makes it a practical and economical solution for professionals working with electrical installations and cable assembly.

As part of the Milwaukee accessories programme, the blade is designed to maintain the tool’s original performance and precision. It fits the corresponding Milwaukee cable cutters and ensures a clean and efficient cut when the tool is used correctly.

The Teng Tools cable cutter 496 250mm is made with chrome-molybdenum steel blades, providing high strength and long life. The forged construction contributes to the tool’s robustness and precision during use.

The cutter is equipped with gearing that increases cutting capacity and makes it easier to cut cables with larger diameters. It can handle both copper and aluminium cables up to 12 mm in diameter.

Two-component handles provide a secure and comfortable grip, reducing fatigue during longer use. An integrated locking lever allows the cutter to be stored safely when not in use.

With a length of 250 mm, this cable cutter is suitable for both precision work and more demanding tasks where power and control are required.

The KNIPEX 95 16 165 SB is an insulated cable cutter designed for cutting single and multi-stranded copper and aluminium cables. It is not suitable for steel wires or hard-drawn copper conductors, which emphasises its specialisation for softer cable materials.

The cutter is equipped with hardened, precision-ground blades that ensure a smooth and clean cut without crushing the conductor. The ergonomic design with multi-component handles provides a secure grip and comfortable handling, even with repeated use.

An adjustable, self-locking screw joint contributes to stability and durability, while the pinch protection increases safety during work. The tool is VDE-certified and tested for electrical work, making it suitable for professional installations.

With a length of 165 mm and a chrome-plated surface, the cutter is supplied in SB-back/blister packaging, making it practical for both workshop and field use.

The Knipex 95 12 200 SB are cable shears designed for cutting copper and aluminium cables with high precision. The double cutting edge and special cutting geometry ensure a clean cut without crushing the conductor.

The shears are not suitable for steel wire or hard-drawn copper conductors, but handle multi-stranded cables up to 70 mm² or a diameter of 20 mm. The blades are hardened and precision-ground to ensure long life and consistent performance.

By dividing the cutting process into a pre-cut and a final cut, the user can cut even thick cables with one hand. The good leverage and ergonomic design reduce the amount of force required during use.

An adjustable, self-locking screw joint provides stability, while the pinch guard reduces the risk of hand injuries. The shears are supplied in SB blister packaging and have a burnished surface that protects against corrosion.

The Milwaukee M18 HCC75-0C is a hydraulic cable cutter from the M18 FORCE LOGIC series, developed for fast and precise cable cutting. It is powered by a brushless POWERSTATE motor that provides high efficiency and long service life.

The tool can cut ACSR/ACSS cables in under three seconds with a force of 77.8 kN and handles cables with a diameter of up to 44 mm. The 340 rotatable head provides flexibility in tight work areas and ensures optimal positioning during use.

The integrated hydraulic pump delivers constant pressure for maximum productivity, while Milwaukees ONE-KEY technology enables wireless data collection and tool usage tracking.

The model is supplied in a case without battery and charger, making it compatible with existing M18 battery systems.

The Teng Tools cable cutter MB444 with 160 mm is designed to cut copper and aluminium cables with high precision. It is equipped with a clamp lock that contributes to safe handling during work.

The cutter has two cutting modes that allow the user to adapt the cut to the cable type and thickness. The reversible handles also make it possible to use the tool for stripping cables, which increases its range of use in installation work.

The plastic-coated arms provide a good grip and comfort during use, even during longer work sessions. With a length of 160 mm, the cutter is easy to handle and suitable for both professionals and hobby users who want a precise and robust tool.

The KNIPEX 95 21 165 is a cable cutter designed for cutting copper and aluminium cables, both single and multi-stranded. It provides a clean and smooth cut without crushing the conductor, making it ideal for precision work in electrical installations.

The cutter is equipped with hardened blades with precision grinding that ensure long life and efficient cutting performance. It has a spring opening mechanism integrated into the joint and protected against loss, as well as an adjustable, self-locking screw connection that provides stability during use.

The handles are coated with plastic to ensure a secure and comfortable grip, and the construction includes pinch protection to prevent injury during work. The tool is burnished to protect against corrosion and has a total length of 165 mm.

The KNIPEX cable cutter 95 21 165 is not suitable for steel wires or hard-drawn copper conductors, but ideal for standard installation cables and flexible wires.

The Knipex 95 12 165 is a cable shear designed for cutting single and multi-stranded copper and aluminium cables. It provides a smooth and clean cut without crushing the conductor, making it ideal for precision work in electrical installations.

The shears are equipped with hardened, precision-ground blades that ensure long service life and efficient cutting performance. The burnished surface protects against corrosion, and the multi-component handle provides a secure and comfortable grip during use.

An adjustable, self-locking screw joint contributes to stability and precision, while the pinch guard increases safety during one-handed operation. The tool is not suitable for steel wires or hard-drawn copper conductors.

With a length of 165 mm and a cutting capacity of up to 50 mm² (or Ø 15 mm) multi-stranded copper cables, this model is a compact and efficient choice for professionals and demanding users.

The Milwaukee Jaw + Blade Cable Cutter M18HCC GW is a spare part and accessory set developed for use with the Milwaukee M18HCC cable cutter. The set consists of a jaw and a blade that together enable precise cutting of EHS wire and steel wire.

The components are designed to withstand high loads and ensure a clean and controlled cut, which is important for professional installation and assembly work. The combination of jaw and blade makes it possible to maintain the tool’s performance over time, even with frequent use.

The product is supplied as a complete set with both jaw and blade, ready for installation on compatible Milwaukee M18HCC units. It is intended for users who wish to replace worn parts or adapt the tool to specific material types.

The Teng Tools cable cutter MB444 with 250 mm is designed for efficient cutting of copper and aluminium cables. It is equipped with a clamp lock that reduces the risk of damage to the cable during work and gives the user better control when cutting.

The cutter has two cutting modes that make it possible to adjust power and precision depending on the cable type. The reversible handles can also be used for stripping, making the tool multifunctional for installation work.

The plastic-coated arms provide a good grip and increased comfort during use, while the compact length of 250 mm makes the cutter easy to handle in confined work areas.

The KNIPEX cable cutter 280 mm is designed for precise and clean cutting of single and multi-stranded copper and aluminium cables. It is not suitable for steel wire or steel rope, which emphasises its specialisation for softer metals.

The cutter is equipped with hardened blades with precision grinding that ensure a smooth cut without crushing the cable. It uses a ratchet mechanism that allows one-handed operation and significantly reduces the required force thanks to a high transmission ratio.

A two-stage gear drive system makes it easier to cut thicker cables, while the compact and lightweight design provides good manoeuvrability even in confined spaces. The pinch protection reduces the risk of injury during use.

The tool is made of specially hardened tool steel and has a black lacquered surface. It is insulated according to the standards VDE, EN 60900 and IEC 60900, making it suitable for live work within the specified safety limits.

The 165 mm Knipex cable shears are designed to cut both single and multi-stranded copper and aluminium cables. They provide a clean and even cut without crushing the conductor, making them ideal for precision work in electrical installations.

The shears are equipped with hardened blades with precision grinding that ensure long life and efficient cutting performance. The chrome-plated surface protects against corrosion and gives a professional appearance.

With one-handed operation and pinch protection, the tool is designed for safe and comfortable use. The adjustable, self-locking screw joint contributes to stability and precision during work.

The model is VDE tested, meaning it has been tested for work under voltage up to 1000 V, and it is supplied in an SB blister pack.

Milwaukee replacement blade cable cutter M18HCC GW is a replacement blade developed for use with Milwaukee M18HCC GW cable cutters. It is designed to handle EHS wire and steel wire, making it suitable for demanding tasks in the cable and steel sectors.

The blade is constructed with a focus on precision and durability, providing clean cuts and maintaining sharpness over time. As an original Milwaukee accessory, it fits directly into the tool without the need for adjustment.

The product is intended for professional users who wish to maintain the efficiency and safety of their Milwaukee cable cutter by using original spare parts.

The Knipex 95 06 230 is a cable cutter designed to cut copper and aluminium cables with high precision. It is not suitable for steel wires or hard-drawn copper conductors but provides clean cuts in soft and multi-stranded conductors without compressing the cable.

The cutter is equipped with hardened blades with precision grinding that ensures smooth and controlled cutting. The adjustable screw joint contributes to stable and even movement during use.

The handle is made of injection-moulded plastic and insulated according to VDE standards, making the tool suitable for work on electrical installations within applicable safety limits. The high leverage allows cutting of cables with minimal effort.

The blade is made of stainless special steel that is oil-hardened and tempered to ensure long life and resistance to wear.

Milwaukee replacement blade cable cutter ACSR M18HCC45 is a set of replacement blades that fit the Milwaukee M18 HCC45 cable cutter. The blade is designed to deliver clean and precise cuts in ACSR cables (Aluminium Conductor Steel Reinforced), which are often used in electrical installations and supply work.

As an original spare part from Milwaukee, the blade is manufactured to meet the technical specifications and quality requirements of the M18 HCC45 system. This ensures that the tool maintains its cutting performance and operational reliability over time.

The product is intended for professional users who need to replace worn or damaged cutting blades on their cable cutter to ensure efficiency and safety on the job.

The Knipex StepCut XL is a cable cutter developed for efficient and precise cutting of copper and aluminium cables. It is equipped with a power transmission that provides high leverage and reduces the required hand force when cutting.

The cutter has two cutting areas: a step cutting edge that holds thin and medium-thick cables near the joint, as well as a front cutting edge that enables step cutting of very thick cables. This design ensures a controlled and even cut.

With long handles and a slim head, good accessibility is achieved even in confined spaces. The handles consist of three ergonomic components, ensuring a comfortable grip during use.

The cutting edges are laser-hardened with a hardness of approx. 56 HRC, which contributes to long service life and precision. The cutter is not suitable for steel-reinforced cables such as ACSR.

Milwaukee Jaw + Blade Cable Cutter -CU/ALU is a replaceable cutting head used for cutting standard Cu and Al cables. It is part of the HCCT series from Milwaukee and comes with the corresponding blades, providing the user with a complete solution for efficient cable handling.

The jaw is designed to deliver clean and precise cuts, which is important when working with electrical installations where cable ends must remain intact. The combination of jaw and blade makes it possible to maintain high performance and safety during use.

The product is intended as a replacement or spare part for compatible Milwaukee cable cutters and is made from materials that withstand repeated stress in professional environments.

The Knipex 95 32 320 is a cable cutter designed for precise cuts in copper and aluminium cables. It uses an innovative 3-step gear drive that provides high leverage and allows cables to be cut with one or both hands.

The shears have hardened, precision-ground blades that ensure a clean and straight cut without crushing the conductors. It is not suitable for steel wire, wire rope or very fine, flexible conductors.

With a length of 320 mm and a weight of 825 g, the tool is both robust and easy to handle, even in confined working conditions. The fixed leg has a support surface that provides stability during cutting, and the multi-component handles provide a secure and comfortable grip.

The surface is black atramentised, which provides some resistance to corrosion and wear. The shears can cut Cu and Al cables up to 60 mm in diameter or 600 mm² cross-section.

Milwaukee Jaws + Blade Cable Cutter -CU/ALU is a standard unit used for cutting copper and aluminium cables. The unit consists of both jaws and blade, making it suitable as a spare part or replacement in compatible Milwaukee cable cutters.

The construction is designed to deliver clean and precise cuts in the conductor, which is important for both safety and efficiency in electrical installations. The combination of jaws and blade ensures that the user gets a complete cutting solution without the need for separate components.

The product is part of Milwaukee's accessory range and is manufactured with a focus on robustness and long service life, so that it withstands repeated use in professional environments.